Optima™ PDUs
Product SelectorMPD 110IEC
2U PDU Specs
Power Outlets
Front Panel
(2) C13, 115/230V
Rear Panel
(8) C13, 115/230V (S)
Other Panels
None
Power Input
Voltage
115 or 230 Vac Selectable
Phase
Single Phase
Frequency
50/60 Hz
Max Current
20 Amps
Max Load
1.84 KVA or 3.68 KVA
Connection
C20
Voltage Monitor
None
Current Monitor
None
Power Protection
Spike/Surge
Yes
EMI Filter
Yes
Over Current
(1) 20A Main Breaker
Remote, Interlocks, and Environment Sensors
Local EPO
None
Remote EPO Type
None (view Commander UCP panels)
Interlocks
0
Temperature
0
Humidity
0
Communications and Interfaces
Display
None
Serial
None
Ethernet
None
Protocols
None
Physical
Layout
2U
Dimensions
2U x 19" W x 6" D
Materials
Chassis: Steel
Finishes
Chassis: Zinc plated Gold
FrontPanel: Zinc plated Gold
FrontPanel: Zinc plated Gold
Operating Conditions
Temperature
32° to 122° Fahrenheit
Humidity
5% to 85% Relative Humidity
Elevation
6,562 feet
Conformance
Warranty
See warranty page for details
Conformances
UL, CSA
Notes:
Read the product Feature Descriptions for important details. Specifications are subject to change without notice.
[1] Certain details of the circuitry may only be revealed by the schematic (available separately).
[2] All ratings of amps are maximum. See model details for deratings.
[3] Feature codes: Enet = Ethernet, VMtr = volts meter, AMtr = amps meter, rEPO = remote EPO, Seq = outlet sequencing, EMI = EMI filter, Srg = surge suppression
[4] Outlet Codes: (S) = switched, (V) = monitored voltage, (A) = monitored amps. Check Feature Descriptions for details.